Evs MulticamLSM Version 10.01 - October 2009 Configura Instrukcja Użytkownika Pobierz pdf (Strona 82)

EVS Multicam Version 10.01 – Configuration Manual

EVS Broadcast Equipment SA – October 2009

Issue 10.01.I

GPI In Settings p.8.3

GPI# Channel/Device Port Function

5 [F1]RMT1 -- [F5]Play

6 [F2]RMT1 -- [F6]Next

7 [F3]RMT1 -- [F7]Skip

8 [F4]RMT1 -- [F8]Pause

[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn

For each GPI input, the operator has the possibility to define the following

parameters:

Channel/Device

This parameter specifies the channel that the GPI will affect or the device that

will send the GPI to the server.

A device can be an EVS Remote #1 or one of the protocols defined in page 7.1 (if

some GPI must be used by the AirBox in a mixed configuration LSM+AirBox, or if

GPIs must trigger some actions on a channel controlled by a Sony protocol, etc.).

If the operator selects EVS Remote #1, the GPI will trigger the selected action on

all channels controlled by that Remote Panel.

Function

This parameter specifies the function that the GPI will trigger: Play, Pause,

Recue, Previous (recue to previous clip inside the playlist), Next (go to next clip

inside the playlist), Skip (skip the next clip in the playlist), -------- (no action is

taken) or Tally. For more information on the possible functions, refer to the

explanation on page 4 of the Setup Configuration in Multicam.

If a GPI is assigned to an AVSP protocol for use with the EVS AirBox or AirEdit

application, the function of this GPI will be defined by the AirBox / AirEdit

software.

For the pinout of the GPI connector and wiring instructions, please refer to the XT

Tech Ref Hardware manual.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 92 93

Brak uwag

Evs MulticamLSM Version 10.01 - October 2009 Configura Instrukcja Użytkownika Strona 82