Evs XSnano Version 11.01 - November 2012 Configuration Instrukcja Użytkownika

CONFIGURATION MANUALVersion 11.01 - November 2012

EVS Broadcast Equipment S.A.- November 2012VIII What's New?

Example 2The allocation of the source audio mono channels shown above means that:• The embedded audio source of the 1st mono channel of the record cha

Audio Output SettingsDescriptionThe audio output settings for audio allow users to:• map the audio mono channels of the material stored on the EVS ser

ExampleIn the screenshot displayed below, the audio mono channels defined on the A/V materialon the EVS server are allocated to the play channels in t

Default Mapping for Audio Inputs and OutputsIntroductionThe tables below present the channel mapping for audio inputs and outputs in thefollowing conf

Audio Embedded OutputsBy default, the audio mono channels from the A/V material stored on the EVS server aremapped to the embedded mono channels on th

The table shows the maximum number of players, and the audio configuration with 8tracks (mono channels):OUT 1 OUT 2 OUT 3 OUT 4Mono1 D 01 D 09 None No

Audio AnalogBy default, the audio mono channels of the A/V material stored on the EVS server are sentto the analog audio output connectors of the play

Collective Editing ActionsYou can apply the following editing actions to all audio channels of a page using thefollowing shortcuts, when available on

The audio gain can be adjusted by steps of 0.75dB, 3dB or 6dB, in the range from-77.25dB to +23.25dB of the current audio level.The following screensh

Dolby Audio ManagementConcepts• Dolby Digital or Dolby 5.1 or AC-3, is an audio coding system containing up to 6discrete channels of sound, with 5 cha

1. Introduction1.1. Introduction to the Configuration of EVSServersNew Configuration ModuleThe Multicam Setup application is used for configuration an

The Dolby E transitions will be correct as long as:• the configuration is correct• the AES stream containing Dolby E is correctly synchronized with th

LTCDescription Longitudinal timecode (timecode defined on or plugged into theEVS server) automatically stored in the first timecode jumptable (LTC tab

Timecode Insertion SettingsIntroductionThe Timecode Insertion settings allow the management of VITC or ANC timecodeschannel by channel.These fields ar

In LoopD-VITCThe D-VITC (Digital Vertical Interval Timecode) and userbits are always written on themonitoring SD outputs of the record codec and are t

UserBitsDescription Enables/disables the insertion of the user bits in the HDoutput.The values specified for the HAnc LTC and HAnc VITC fieldshave to

UserBitsDescription Enables/disables the insertion of the user bits in the SDoutput.When TC0 is selected for the D-VITC field, the user bitsvalues wil

Supported PacketsThe supported ancillary data packets shall comply with the SMPTE standards 334M,291M (type 2 ANC packet).Up to now, SMPTE 334M data p

Custom 1/2Description Enables/disables a customized decoding of the SMPTE 334Mdata packets. See section "Customizing the Decoding ofSMPTE Data&qu

3.5. Network Tab3.5.1. OverviewNetwork TabThe Network tab consists of one page in the basic and/or advanced mode in the server-based application. The

The following screenshot shows the Net Name field on page 1 of the Network tab in theserver-based application in advanced mode when no SDTI network is

• a configuration section for each configuration line. It is presented in seven tabs whicheasily give access to all configuration parameters:Simplific

• in the Multicam Configuration window, Network tab, in the basic and advanceddisplay modes on page 1 in the server- and web-based interfaces.• in the

3.6. Monitoring Tab3.6.1. OverviewMonitoring TabThe Monitoring tab consists of one page in basic mode (there are no advancedparameters) in the server-

3.6.2. OSD SettingsIntroductionThe OSD settings allow specifying the settings related to the OSD and information to bedisplayed on the monitoring scre

Disk ErrorDescription Enables or disables the disk error information display on theoutput monitor.As the server is equipped with a RAID disk array, th

Char OUT J4Description Specifies the monitoring output type generated on the J4connector.Values • SD• HDDefault value System dependentChar OUT J1Descr

SDEdge Enh.Description Defines the edge enhancer strength used when generating theSD downconverted output video.Values 0 to 100Default value 66RECHD

3.7. Protocol Tab3.7.1. OverviewProtocol TabThe Protocol tab consists of 3 pages in the basic mode and 4 pages in the advanced modein the server-based

3.7.2. Clip IdentifiersLSM IDThe LSM ID is a clip identifier based on the EVS video server structure.The LSM ID is made up of 3 digits and 1 letter, f

WarningThe Sony BVW settings are only available if the license code 118, required towork with the Sony protocol, is valid.The following screenshot pre

List Remote CAMDescription Allows access to the CAM recorders of the remote serverspecified in the XNet field.Values • Yes, meaning that the recorders

Configuration Available from Server, Web and RemotePanelYou can configure the EVS server using one of the three available tools:• The server-based app

The following screenshot shows the RS422VarID and the VDCP visibility settings areas,available in the Protocol tab, in advanced mode:VarID Definition

VarID Configuration FileThe VarID parameters are defined in a configuration file. This file, named varid.ini, islocated in the C:\LSMCE\DATA directory

FormatDescription Specifies whether the VarID has an ASCII or binary format.Values • ASCII• BinaryDefault value ASCIIVDCP VisibilityDescription This f

3.8. GPI Tab3.8.1. OverviewGPI TabThe GPI tab consists of one page in basic mode (there are no advanced parameters) in theserver-based application. Th

3.8.2. GPI SettingsIntroductionThe GPI Settings allow specifying the settings related to the GPI inputs and outputsfeatures.These fields are available

• Odetics: Play, Pause, Recue, Next.• VDCP: Play, Pause, Recue, Previous, Next, Skip.NoteFor all protocols, use the channel assignment (PGM1 to PGM4)

GPIs IN - FunctionDescription Specifies the function associated to the GPIinput line.According the configured protocol some or all of the functionsde

GPIs IN - DelayDescription Specifies the time (number of seconds and/or frames) that theserver will wait after receiving the input signal before execu

GPIs OUT - Pulse durationDescription Defines the pulse duration (number of seconds and/or frames)for pulse type output lines.Values • 00s00fr to 02s00

How to Activate the Tally FunctionTo use the tally function, proceed as follows:1. Activate it using the Tally parameter.2. Go to the GPIs IN settings

Documented User InterfacesThe Server Configuration manual deals with all user interfaces used to configureMulticam: server-based application, web-base

3.9. Operation Tab3.9.1. OverviewOperation TabThe Operation tab consists of six pages in the basic mode in the server-based application.No advanced mo

Clips SettingsSetting Name BasicOperationalSetupClips settings P1 to P2 2.xAutomake clip for cam A/B/C/D P1 XGuardbands P1 XDefault clip duration P1 X

Miscellaneous SettingsSetting Name BasicOperationalSetupProtection settings P3 5.1Protect pages X XConfirm delete clips/playlists X XPush settings P3

3.9.2. OSD SettingsIntroductionThe OSD settings allow users to specify which and how the information will be displayedon the OSD.These fields are avai

OSD on inputsDescription Enables / disables the OSD on the record channels.Values Yes (default) / NoBackgroundDescription Applies a dark gray backgrou

Audio metersDescription Shows/hides the audio meters on the OSD.Values Yes / NoDefault value YesDB AdjustDescription Adjusts the value of the displaye

3.9.4. Clips SettingsIntroductionThe Clips settings relate to various aspects of the clip management: clip definition,storage location, metadata, and

Automake clip for CAM A/B/C/DAvailability This parameter is only displayed in XSense configurations.Introduction When creating clips, the clip corresp

Autoname clipsDescription If this function is enabled, the value of the selected field willautomatically be used to name the clip upon creation.Values

Mark cue pointDescription Specifies how the cue point timecode will be memorized.Values Two values are possible for this parameter:• Live:Memorizes cu

When Starting the EVS Server After Initial ConfigurationAfter the initial configuration, you will select a configuration line and press ENTER to runth

Default copy/moveDescription Specifies whether the copy operations should be executedpreferably using the SDTI or the Gigabit network.Values The value

Playlist Receive pageIntroduction This setting is linked to the copy function that allows users toautomatically create a local copy of all network cli

AvailabilityThe Playlist settings are only available if the license code 111 is valid.On an XSnano server, the license code 111 is only allowed with a

Insert in playlistDescription Specifies if the clips add to a playlist are insert before or afterthe active clip in the playlist.Values After / Before

Playlist auto fillDescription Specifies which camera angles will be added to the playlistswhen using the Fill Playlist (F9) function from the main men

3.9.6. Protection SettingsIntroductionThe Protection settings aim at protecting clips stored on the EVS server from deletion.These fields are availabl

Confirm delete clips/playlistsDescription Enables a confirmation request when users delete clips,playlists or in both situations.Values The following

The following screenshot presents page 3 of the Operation tab in the server-basedapplication, where the Push settings are available, and highlights th

Push Target 1 / 2Description Specifies to which machine(s) on the network the clips mustautomatically be sent when the operator uses the PUSHfunction

3.9.8. Audio SettingsIntroductionThese fields are available in the following interfaces:• in the Multicam Configuration window, Operation tab, in the

2. Multicam Setup2.1. Overview of User Interfaces2.1.1. Overview of the Setup AreasGeneral DescriptionThe Multicam Setup window is the window that ope

Lipsync value (ms)Description Specifies the delay (in ms) between video and audio signals:• A positive value means video is ahead of audio.• A negativ

3.9.9. EVS Controller SettingsIntroductionThe EVS Controller settings gather:◦ Settings related to the behavior of the keys, lever or jog of the Remot

Fast jogDescription Sets the increment of the jump when the Remote Panel isused in Fast Jog mode.Values The values from 1 to 20 times are possible.Def

Record keyDescription Changes the function of the RECORD key on the RemotePanel, as described below.Values The following values are possible:• Start R

PGM/PRV modeDescription Allows the user to select the PGM/PRV mode on the LCDdisplay as a function accessible from the A button on theRemote Panel’s m

GlossaryGGPIAbbreviation for General Purpose Interface. This refers to a device used as ancommunication interface with the EVS server. It has digital

SServer-Based Multicam Setup applicationServer-Based application used to set up and configure the EVS servers. The short form is'Server-Based app

To learn more about EVS go to www.evs.comCorporate+32 4 361 7000North & Latin America+1 973 575 7811Asia & Pacific+852 2914 2501Other regional

The following screenshot presents the Multicam Setup window in the web-basedinterface:7 2. Multicam SetupEVS Broadcast Equipment S.A. - November 2012

Description of the AreasThe table below describes the various parts of Multicam Setup window:# Name of area Description1. Title bar The title bar disp

# Name of area Description4. ConfigurationSummaryThis area shows a summary of the server parametersfor the configuration line selected in the Configur

Configuration LinesIn the Configuration Lines area, a configuration line is highlighted when it is selected.The main commands for configuration line m

Configuration LinesCommand description Command iconRenaming the configuration lineEntering the Configuration window to edit the settings related theco

2.2.2. Launching a ConfigurationIntroductionWhen the EVS server has initialized, the Multicam Setup window stays open, by default,until the operator s

2.2.3. Editing a ConfigurationHow to Edit a ConfigurationIntroductionWhen the operator hits a key on the keyboard connected to the EVS server (within

Invalid ConfigurationInvalid configuration lines are easily detected in the server-based application:• When a configuration line becomes invalid, a re

2.2.5. Exporting and Importing Configuration LinesHow to Export Configuration LinesNoteThe screenshots in this section features configuration names wh

3. If requested, change the selection of configuration lines selected for export on the leftpane:◦ By default, a cross is displayed in front of all co

2. Click Export next to the configuration line you want to export.3. In the File Download dialog box, click Save.4. Select the location where you will

3. On the left pane, use the UP ARROWor DOWN ARROW key to highlight the folderthat contains the configuration file you want to import.When the folder

In the Web-Based InterfaceNoteIn the web-based interface, it is only possible to import configuration lines one byone.To import configuration lines on

CopyrightEVS Broadcast Equipment S.A.– Copyright © 2012. All rights reserved.DisclaimerThe information in this manual is furnished for informational u

2.2.6. Changing the Position of Configuration LinesIn the Server-Based ApplicationTo move a configuration line up in the list in the server-based appl

In the Web-Based InterfaceThe feature to copy and paste configuration lines is not available as such in the web-based interface.You can however use th

2.3. Server Parameters2.3.1. Chapter ContentsThe table below presents the topics of this section and shows whether the describedfeatures are available

In the Server-Based ApplicationTo assign a server facility name in the server-based application, proceed as follows:1. In the Multicam Setup window, p

The password protection has the following impact on the various user interfaces:• The password is required to apply changes to configuration parameter

Deactivating the Password on the EVS ServerOnce the password protection is active, it can only be deactivated from the server-basedapplication as foll

SettingsThe MTPC board connection settings are described in the table below:Setting DescriptionIP Address Specifies the IP address to connect to the p

Supported FormatsThe supported date format is DD-MM-YYYY, as shown in the example below:• 15-03-2011 for March 15, 2011The supported time format is hh

2.3.6. Setting the Default Output To VGA/VideoIntroductionBetween the PC boot and the I/O boot, the video driver is loaded. The Default Output toVGA/V

Overview on the Raid Configuration WindowThe Raid Configuration window is available from the Multicam Setup window, whenpressing R to call the Raid Co

EVS Broadcast Equipment S.A.- November 2012II

Field DescriptionThe following table describes the fields editable in the Requested Configuration area in theRaid Configuration window. The fields are

2.4. Licenses and Maintenance2.4.1. Overview on Options Codes ManagementIntroductionTo run a software application and/or specific software options, no

2.4.2. Options Codes Management WindowIn the Server-Based ApplicationThe window features three areas which contain the information mentioned below:Are

In the Web-Based InterfaceThe window features two areas which contain the information mentioned below:Area DescriptionCentral area All codes available

How to Enter License Codes from a COD FileIn the Server-Based ApplicationTo enter a new license code delivered via a COD file, proceed in one of the f

3. Press ENTER.Next to the line corresponding to the activated codes, the license type and the expirationdate (if any) are displayed.In the Web-Based

2.5. Server Maintenance2.5.1. Chapter ContentsThe table below presents the topics of this section and shows whether the describedfeatures are availabl

ProcessThe hardware check runs the same steps and checks as the server boot process :1. MTPC check2. H3X or HCTX check3. Video Codec check4. Quad boot

ExitWhen exiting Multicam, a warning will appear to remind the operator that one disk wasdisconnected, and invite him to perform a hardware check to r

Retrieving LogsIf you suspect that the drive disconnection in operation was not due to a severe diskfailure, but perhaps to the server being too promp

Table of ContentsTABLE OF CONTENTS IIIWHAT'S NEW? VII1. INTRODUCTION 11.1. Introduction to the Configuration of EVS Servers 11.2. Introduction to

If you don’t need to retrieve the clips or the record trains, you don’t need to rebuild theRAID. In this case, select the 'Clear All Clips'

After the export action, a message box asks you whether you want to delete the logs onthe EVS server. If you answer 'Yes', the content of th

3. Multicam Configuration3.1. Overview on User Interfaces3.1.1. IntroductionPreliminary RemarksConfiguration as Initial StepPrior to using Multicam, t

The following table provides an overview on the features available in each user interface:Configuration WindowTechnical Settings Operational SettingsS

Concurrent Modifications in the Remote Panel and theServer-Based ApplicationWhen a parameter is modified with the Remote Panel, and that parameter is

Accessing the Multicam Configuration WindowIn the Server-Based ApplicationTo access the Multicam Configuration window from the Multicam Setup window w

User InterfacesServer-Based User InterfaceThe following screenshot presents the 1sttab, and 1stpage of the Multicam Configurationwindow in the server-

3.1.3. Navigating and Editing in the MulticamConfiguration WindowIn the Server-Based ApplicationNavigation CommandsThe following table presents the co

Editing CommandsThe following table presents the commands to edit the configuration settings in theMulticam Configuration window when the field has be

In the Web-Based InterfaceNavigation and Editing CommandsThe navigation and editing commands in the web-based interface are the commonly usedcommands

3. MULTICAM CONFIGURATION 423.1. Overview on User Interfaces 423.1.1. Introduction 423.1.2. Overview of the Multicam Configuration Window 443.1.3. Nav

Required Application RebootModifications to some parameters will only be applied after an application reboot. This ismentioned in the sections where t

Accessing the Technical Setup MenuTo access the Technical Setup menu, press F0 from the Main Setup page.The Technical Setup menu opens on the 1stpage.

Navigation CommandsThe following table presents the commands to navigate in the Setup menus of the RemotePanel:Command description Command keyMoving t

3.2. Supported Configurations3.2.1. General Information on SupportedConfigurationsOverview on Supported Configuration TypesAn XSnano server, equipped

Channel AssignmentThe following general principles apply to all configurations, and are valid for all EVSservers equipped with V3X or COHX boards:• Th

The following principles apply to EVS servers equipped with V3X boards:• The primary links of the V3X boards mentioned in the tables of this section c

Available ConfigurationsIN4/OUT1 IN3/OUT2 IN2/OUT3 IN1/OUT4#REC #PLAYPrim.LinkSec.LinkPrim.LinkSec.LinkPrim.LinkSec.LinkPrim.LinkSec.Link1 0 REC12 0 R

3.2.3. General Principles on 3D ConfigurationsIntroductionThe 3D configurations can be used on an XSnano server, using the following connectioninterfa

Available ConfigurationsThe tables below show the available 3D configurations with standard cameras on anXSnano server. They show the link assignment

3.3. Server Tab3.3.1. OverviewServer TabThe Server tab consists of a single page in the basic or advanced mode in the server-based application. It cov

3.9.5. Playlist Settings 1413.9.6. Protection Settings 1453.9.7. Push Settings 1463.9.8. Audio Settings 1493.9.9. EVS Controller Settings 151GLOSSARY

Setting Name Basic AdvancedTechnicalSetupIP Address X XSubnet Mask X XDefault Gateway X X3.3.2. Video and ReferenceVideo and Reference SettingsIntrodu

Field RateDescription Field frequency used (Hz).Both field rate and resolution give the video standard.Values 50.00 Hz (PAL) - default59.94 Hz (NTSC)5

Horizontal Res. (HD)Description Number of white-to-black and black-to-white transitions thatcan be seen from the left to the right of the picture (pix

GenlockDescription Specifies the type of genlock signal, the status and the framesynchronizer mode.Values Type: 'Blackburst' or 'Tri-Sy

Bitrates and Horizontal Resolution in HD 720p / 1080iHD 1080i50 HzHD 1080i59.94 HzHD 720p50 HzHD 720p59.94 HzCodec Type DVCPro HDBitrate 100 MbpsDefau

SD (Standard Definition)Description Allows adjusting the digital main phase of the mainframe forthe standard definition. The value is adjusted by step

3.3.4. Interpolation SettingsIntroductionThe Interpolation settings are available on the Server tab in the server-based application(1stpage) and web-b

Vertical Interp. (Vertical Interpolation)Description Enables or disables the two-line interpolation process.Values • No (default)• YesFour LinesDescri

General DescriptionThe PC LAN settings allow the MTPC board of an EVS server to communicate andexchange information with other EVS hardware on a setup

3.4. Channels Tab3.4.1. OverviewChannels TabThe Channels tab consists of maximum nine pages in the advanced mode in the server-based application, and

EVS Broadcast Equipment S.A.- November 2012VI Table of Contents

Setting Name Basic AdvancedTechnicalSetupAudio settings P2 P2 T2.XAudio connectors X X XNumber of tracks X X XAudio full scale X XAncillary mode X XSa

Setting Name Basic AdvancedTechnicalSetupIN Loop settings XSD OUT settings XHD OUT settings X3.4.2. ChannelsBase SettingsIntroductionThe base settings

InputsDescription Number of logical record channels in the given configuration.The partition of the disk storage between these channels, andthe advanc

3DAvailability The parameter is only available with V3X boards if a 3D optionhas been subscribed to (license code 23 for 3D Dual Link).Description Act

The following screenshot highlights the Port settings, defined on page 1 of the Channelstab in the server-based application:RS422 #1 - #4Description S

The following screenshot highlights the Channel and Control settings, defined on page 1of the Channels tab in the server-based application:NameDescrip

Sec. ctrl (Secondary Controller)Description Name of the main device/controller allowed to control the givenplay or record channel.Values For a control

Rules for Controller AssignmentMain Rules for XSnano serverOn an XSnano server, the following main rules are applicable:• In an XSense base configurat

Remote VDCP Sony Odetics DD35OdeticsF&KVDCPF&K1 PGM2 PGM2> 2 PGM1 REC 1> 1 REC1 PGM+ 1 RECSeveral PGM+ 1 RECSeveral PGM+ Several REC1. E

Remote VDCP Sony Odetics DD35OdeticsF&KVDCPF&K2 PGM> 2 PGM1 PGM+ 1 REC11 RECSeveral PGM+ 1 REC1Several PGM+ SeveralREC11. The recorder cann

What's New?The changes linked to new features in version 11.1 are listed in the table below.In the configuration manual, the icon has been added

Secondary >Primary vRemote VDCP Sony Odetics DD35OdeticsF&KVDCPF&KRemote-VDCP-Sony-Odetics-DD35-Odetics F&K-VDCP F&K-Exclusive mode

Parallel mode - REC ChannelsThe following table shows the supported protocol combinations in parallel mode on recordchannels.Secondary >Primary vRe

Recorder SettingsIntroductionThe Recorder settings allow specifying configuration settings associated to the recordchannels.These fields are available

Clip CapacityDescription Recording mode on the record channels.Values The following values are available: Global / Per channel• Global:In this mode, t

IN1 XX% LoopWarningA change to this parameter requires an application reboot (ALT+Q from theoperational windows) to be taken into account.Description

The following screenshot shows Audio settings and Audio Monitoring settings, defined onpage 2 of the Channels tab in the server-based application:Audi

Audio Full ScaleDescription Maximum audio level for the analog outputs on the server (indB).It allows indirectly defining the head room, as the audio

Overview on Advanced Audio SettingsIntroductionThe Advanced Audio settings are defined from the Channels tab, pages 3 to 6 of theMulticam Configuratio

General PrinciplesThe advanced audio settings are presented on each page as a table:In the table, the information is organized as follows:• The rows c

Audio Input SettingsDescriptionThe advanced audio input settings allow users to specify:• which type of audio source should be taken into account in t