Evs XT2 Version 11.02 - July 2013 Configuration Manual Instrukcja Użytkownika Pobierz pdf (Strona 62)

3.1.6. Required Application Reboot

Introduction

Modifications to some parameters will only be applied after rebooting the application.

When you change one of the following parameters, a message will inform you that you

need to reboot Multicam.

Such parameters are summarized below, but the parameter description also specifies

when a reboot is required:

Tab Name Setting Name

Server tab Some video and reference settings:

• Field rate

• Resolution

• LTC timecode

Server tab All codec settings

Server tab All PC LAN settings (only editable from the Multicam Setup window)

Channels tab Some base settings:

• Inputs

• Outputs

• Base config

Channels tab One audio setting:

• Number of tracks

Channels tab One recorder setting:

• Loop % (in IN1 XX% Loop field)

Network tab All SDTI settings:

• Speed

• Net name

• Net number

• Type

Network tab All Gigabit settings:

• Gigabit connection

• Gigabit IP configuration

• Gigabit prioritization

Monitoring tab One setting in the Downconverted Outputs area:

• Char OUT J4

• OUT B J3

• Aspect ratio

54 3. Multicam Configuration

EVS Broadcast Equipment S.A. Issue 11.02.A July 2013

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 219 220

Brak uwag

Evs XT2 Version 11.02 - July 2013 Configuration Manual Instrukcja Użytkownika Strona 62