EVS XT2+ Instrukcja Użytkownika Pobierz pdf (Strona 50)

Issue

10.05.A

XT2 Series DISK RECORDER – Version 10.05 - Software Technical Reference

EVS Broadcast Equipment SA – Jluly 2011

1.4.6 FORCE LOAD CLIPS

This function is used when swapping disks arrays between XT2+ servers. If clips

are saved to disks, this command forces the system to re-load the clips.

To force loading of clips, proceed as follows:

1. Press F9 to open the Maintenance menu.

2. Press the UP ARROW and DOWN ARROW keys to select the Force Load

Clips option line and press ENTER.

3. Confirm the reloading with ENTER or cancel with ESC.

1.4.7 PHASE DEFINITION

This option is used to adjust the digital phase of the mainframe.

STANDARD DEFINITION

If the REF TYPE (see Configuration windows) is set to ‘SD BlackBurst’, the phase

definition window is as follows:

The phase value for SD can be adjusted between - 12000 ns and +15000 ns by 37

ns steps.

HIGH DEFINITION

If the REF TYPE is set to ’SD BlackBurst’ and if the system is configured for HD,

the phase definition window appears as follows:

The main phase value for SD can be adjusted between - 12000 ns and +15000 ns

by 37 ns steps and the secondary phase value (relative phase of the HD SDI

outputs compared to the phase of the SD SDI outputs) can be adjusted between -

1000 ns and +1000 ns by 13.5 ns steps

If the REF TYPE is set to ‘HD Tri-Level Sync’, the phase definition window is as

follows:

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 84 85

Brak uwag

EVS XT2+ Instrukcja Użytkownika Strona 50