Evs IPDirector Version 5.8 - July 2010 Part 1 User Instrukcja Użytkownika Pobierz pdf (Strona 77)

Issue 5.8.B IPDirector

Version 5.8

–

User Manual

–

Part 1: General Workspace

EVS Broadcast Equipment – July 2010

Action Description

TALLY Activates or deactivates the on-air flag on the selected

channel.

EXITASAP Initiates a command to exit the loop as soon as possible

without playing the current element until its end and jump to

the selected element.

EXITOUT Initiates a command to exit the loop as soon as the OUT point

of the current element is reached and jump to the selected

element.

NONE No value is defined.

Channel

The Channel field allows the user to define the channel on which the GPI key

action will be executed. The possible values are:

• a channel of the EVS server to which the GPI is physically linked

• the ‘None’ value.

Trigger Mode

The Trigger Mode field allows the user to define the type of trigger signal that will

be sent by the GPI to the EVS server. The following trigger modes can be defined:

Trigger Mode Description

Pulse Rising Edge

The trigger is done on a rising edge pulse.

Pulse Falling Edge

The trigger is done on a falling edge pulse.

Level High

The trigger is done when the level changes to

high level

Level Low

The trigger is done when the level changes to

low level

None No trigger mode is defined.

Note

If the operator selects ‘None’ for one of the fields, all three fields are

reset to ‘None’. It is considered that the GPI is not used.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 132 133

Brak uwag

Evs IPDirector Version 5.8 - July 2010 Part 1 User Instrukcja Użytkownika Strona 77