Evs MulticamLSM Version 11.00 Operating Manual Instrukcja Użytkownika Pobierz pdf (Strona 41)

Multicam - Version 11.00 – Operating Manual

EVS Broadcast Equipment SA – April 2012

Issue

11.00.C

7.1.2 Operational Menu

The operational menu in Multi PGM mode gives access to the functions detailed in the

following paragraphs:

Rst Cam

This function restores the position of cameras on the active channels: CAM A on PGM1,

CAM B on PGM2, etc.

Note

When a clip/playlist is loaded on a channel, switching back to Live mode will

recall the record train, which was last used on that output. This avoids too

frequent uses of the Rst Cam function.

Sync To

This button allows you to synchronize the selected PGM in use with another one. Press

this button and then select the PGM to be used as a reference. This function is not

available with network trains.

2nd CTRL

This function allows the operator to swap the control of one or several play channels

between the EVS remote and a third-party controller. Both controllers receive

permanently the status of the channel(s), but only one controller at a time is able to

actually control a channel. The secondary controllers are defined in page T2.2 of the

Technical Setup menu.

Press this function to enter the 2nd CTRL menu, select the channels that you want to

pass to the secondary controller by pressing the corresponding A, B or C key, then press

D (DONE) to validate your selection. Do the same to bring the control of a channel back

to the EVS remote.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 198 199

Brak uwag

Evs MulticamLSM Version 11.00 Operating Manual Instrukcja Użytkownika Strona 41