Evs MulticamLSM Version 11.00 Operating Manual Instrukcja Użytkownika Pobierz pdf (Strona 49)

Multicam - Version 11.00 – Operating Manual

EVS Broadcast Equipment SA – April 2012

Issue

11.00.C

9.2.3 Recalling a Clip

How to Recall a Clip

To recall a clip, proceed as follows:

1. Select the Clip page 1, 2, 3… to 10 (PAGE key).

2. Select the bank in which the desired clip is located (the F10 key is reserved for the

playlist bank available on each page).

3. Select the desired clip via the F1 - F10 keys.

Clip Recalled Based on the PREF Setting

If PREF is ON, the preferred camera angle of the clip will appear on the primary channel,

the secondary camera angle on the next controlled channel, then the other camera

angles on the next channels in alphabetical order.

Example: If the preferred camera angle for clip 124 is camera C, when loading the clip,

124C is loaded on the primary channel, whatever the camera present on that channel

before loading the clip.

If PREF is OFF, when recalling the clip, the camera angle will be the same as the one

who was already present on each controlled channel. If that camera angle does not exist,

the first available camera angle of the clip will be used.

Example: If camera B is the current camera on the primary channel, when calling clip

124, it is 124B that appears on the primary channel, even if it is not the preferred camera

angle.

When the operator is controlling only one channel (such as with PrvCtl), the clip will

appear at that location only. In the case of a clip containing a single camera angle (only

an «A», «B», «C» or «D» clip), when in full control of all outputs, the clip recalled will

appear on the primary channel.

Toggling Between the Camera Angles

If Recall clip toggle is enabled in the Operational Setup menu (p.9.1 F6), pressing

several times the F_ key will always recall the first frame of the clip, but showing the next

camera angle every time the F_ key is pressed.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 198 199

Brak uwag

Evs MulticamLSM Version 11.00 Operating Manual Instrukcja Użytkownika Strona 49